For passive systems, "heavy" and "light heavy" building methods are preferred, because such buildings heat up slower, they keep heat longer without large temperature fluctuations and there is no overheating in them, thanks … read on
Author Archives: energy
Wood – fuel of the future
Adequate fuel is required to power the tiled stove. Wood is a material, which regenerates in nature. It practically accumulates solar energy, and we can use it by burning it in the furnace … read on
HARD COAL COMPARISON, FUEL OIL, NATURAL GAS AND LIQUID GAS AS FUELS USED IN BOILER ROOMS
Hard coal is a solid fuel, which in itself is a clear distinction from the other three fuels, being liquids. The course and conditions of burning solid fuels differ from these, which … read on
Insulation materials for the furnace
The tiled stove is a pleasant, nice source of heating. However, it gives off its heat not only in the places we require, but it heats in virtually all directions. Also then, when warm air … read on
Designing – Combined furnace
The combined furnace consists of a heating insert with foundation combustion and ceramic smoke ducts, instead of an additional heating box between the heating insert and the chimney connection. In shaping these smoke channels, we have … read on
Chimney for a tiled stove
The tiled stove is very nice, a pleasant and romantic source of warmth. Usually it is fired with wood, which is a self-renewing raw material. So that you can cleanly burn this or in it … read on
The body of an energy-saving building and internal space
A certain difference can be noticed in the lumps of energy-saving houses that use solar energy for heating, which is dictated by the conditions described above. This difference prompted theorists to create the concept of "solar architecture".
Shape of the building, … read on
Designing – Foundation furnace
The foundation furnace is not equipped with a heating insert. There is also no additional heating box or ashtray. It is made of chamotte elements and can be practically anyone … read on
Steel painting
Old, strongly rusty steel bridge to be repainted. Please list the necessary steps in this regard
These steps are as follows::
1) grinding the steel structure with blast furnace slag;
2) painting with paint … read on
Designing – Convection oven
Before designing a convection oven, we should stock up on the data sheet of the heating cartridge, which we want to apply. As a rule, a scale sketch is attached to the datasheet 1:10. If in the project we do … read on