Traditional floor screed is a uniform layer, which during laying has a loose consistency, plastic or liquid, and after a certain period of time it hardens. The spout is so full … read on

So-called. floating floor is the most commonly used solution when finishing a raw concrete ceiling. Floating floor is a concrete screed about a thickness of 5 Cm, made on insulating material – for example. on decomposed on … read on

Dense-ribbed wooden ceilings are ceilings made of wooden beams (called ribs) with a short wheelbase, thanks to which they carry light loads and can have small dimensions. They are most often made of boards … read on

POROTHERM ceilings are made of ceramic blocks, which is based on ceramic-reinforced concrete ceiling beams. The upper level of the masonry, on which the ceiling is to be laid should be leveled with a thin layer on the right … read on

The most characteristic varieties of dense-ribbed ceilings:

• Ceiling made of Akerman-type ceramic hollow bricks – Ceiling without prefabricated beams, made of ceramic hollow blocks laid on formwork arranged along the ceiling ribs. After concreting … read on

Hollow-core slabs are prefabricated slabs with holes – channels, along the cross-section (so-called. Żerań plates). The holes reduce the weight of the plate . The thickness of the plates is 24 Cm, hole diameter – 19,4 … read on

The basic function of the ceiling is to transfer the load to the walls, and through them on the foundations of the building. Ceilings carry their own weight, payloads and partition wall loads. Stiffen the walls of the building, separate from … read on

Tangible heat magazines. This type of thermal energy storage is still the most common. The heat is stored in materials with a high heat capacity, which is related to their specific mass and … read on